How to Get Rid of Shower Grout, in 9 Simple Steps

How to Get Rid of Shower Grout, in 9 Simple Steps

While you’re living in your rental, you probably want a nice, clean shower with a sparkling white grout like the day you move in. Or, you might be leaving your rental and need to clean up the grout quickly. There are many solutions you can try to make your grout as clean as possible, and finding the best way to clean tile and grout in a shower, on a floor, or on another surface is to test solutions to get them. desired results.

Here’s everything you need to know about the trial and error process to getting the cleanest shower grout possible.

Tools for cleaning grout in showers

Stock up on the following cleaning tools and solutions to help you find the best way to clean shower grout in your home:

  • Brush with stiff bristles, like a small household cleaning brush or even a clean toothbrush (which you will never use again)
  • Empty spray bottle
  • Small or medium size bowl
  • Measuring cup
  • Hydrogen peroxide
  • White vinegar
  • Baking soda
  • Commercial tile and grout cleaner
  • Oxygen bleach, such as OxiClean
  • Bleach
  • A steam mop

How to clean grout in the shower

The effectiveness of various strategies depends on how dirty the grout is, the type of grime, and when you last cleaned the tile and grout. Use the following shower tile and grout cleaning steps to find the best solution for your home:

1. Try lukewarm water and a stiff cleaning brush

If your grout isn’t too dirty, you may be able to get away with scrubbing the grout with lukewarm water and a stiff-bristled cleaning brush. All you need to do is spray lukewarm water on the surface and scrub it off. Let it dry completely, then see if it needs another round or a harder solution.

2. Mix a solution of vinegar and lukewarm water

White vinegar is a household and kitchen staple thanks to its acidity. For stubborn dirt and stains, try the old half-and-half mixture of white vinegar and lukewarm water on grout. Mix equal parts vinegar and lukewarm water in a spray bottle, spray the mixture on the tile and grout, let sit for about 5 minutes, then scrub it with the cleaning brush.

3. Apply baking soda to the grout, then spray with vinegar

You can target the grout lines better by coating them with a paste of baking soda and water, then spraying the area with the white vinegar solution. This mixture will start to bubble and foam, and once it stops, you can start scrubbing. Make sure to rinse the area well and allow it to dry.

4. Use hydrogen peroxide on a particularly dirty grout

Another option for stubborn stains and dirt is to use hydrogen peroxide, a common chemical you might find in your first aid kit. This could be the easiest way to clean grout from a shower, bathroom floor, kitchen, or other tiled surface. Slowly pour small amounts of hydrogen peroxide over the grout you wish to clean and scrub. Or, you can mix it with baking soda to create a paste that you can apply directly to the grout lines, rub it in a bit, and then rinse it off.

5. Spray oxygen bleach and let sit for 15 minutes

If vinegar, baking soda, and hydrogen peroxide don’t do the trick, go to your laundry room to get the oxygen bleach. This powerful bleach targets very tough dirt, grime and stains on many materials and surfaces, including tile and grout. Here’s how:

  • Rinse the area you are going to clean if you recently tried any of the previous solutions
  • Open windows or otherwise ventilate the area to promote air circulation and avoid irritation
  • Review the instructions for safe use and the need for protective equipment, such as rubber gloves
  • Sprinkle oxygen bleach over the area and let sit for up to 15 minutes
  • Rinse again with clean water

6. Choose a commercial tile and grout cleaner

Commercial grout cleaners target mildew, dirt, mildew, soap scum, and other stains that dull your shiny white grout. If the other household tricks with vinegar and baking soda don’t work, try one of two methods with a store-bought commercial cleaner:

  • Spray the cleanser on the area, let it sit, wipe it off, and then rinse.
  • Spray on the cleanser, let sit, scrub with a stiff-bristled cleaning brush, then rinse.

Scrubbing is your best bet for really removing dirt and grime from your grout. And as with the oxygen bleach solution, be sure to rinse the area completely before using this product if you’ve recently tried the previous household tips.

7. Wash with a steam mop

Consider investing in a steam mop, which uses hot steam to lift and remove all kinds of dirt and grime from hard surfaces, like tile floors. You can also use this tool as a pre-wash, for finishing touches, or to knock it out in one fell swoop.

8. Use bleach if nothing else works.

Try mixing 3/4 cup household bleach with 1 gallon of water for another potent grout-cleaning concoction. Thoroughly dip your cleaning brush into the solution, scrub the affected areas (paying special attention to the grout lines), and let sit for up to 15 minutes. Then rinse with clean water to reveal your new white grout lines.

Again, make sure you have thoroughly rinsed all other attempts with baking soda or vinegar, as if they come in contact with bleach it could result in toxic fumes.

9. Treat your grout regularly

The best way to clean grout from shower tiles and keep it cleaner longer is to regularly spray the area with one of your trusted household solutions. For example, you can keep a spray bottle filled with white vinegar and water solution that you apply once a week to your shower, bathroom tiles, or other tiled surface. All you have to do is wipe it off quickly and rinse as needed. This can reduce the need to use harsh chemicals and elbow grease for scrubbing.

Regularly cleaning shower tiles and grout can help make your rental comfortable and safe for you and anyone else who spends time there. And if you’re ready for a new rental property, use Zumper to search through thousands of listings in your ideal neighborhood.

Related Posts