How to Grow and Care for Swan River Daisy

Common NameSwan River daisy
Botanical NameBrachyscome iberidifolia
Plant TypePerennial, annual
Mature Size12-18 in. tall, 1-3 ft. wide
Sun ExposureFull
Soil TypeWell-drained
Soil pHNeutral
Bloom TimeSummer, fall
Flower ColorBlue, purple, pink, white, yellow
Hardiness Zones9-11 (USDA)
Native AreaAustralia

Swan River Daisy Care

You don’t need a green thumb to grow Swan River daisies, but you will need a sunny spot with well-drained soil. Start this plant in the spring, either from seed or with nursery stock. This drought-tolerant flower doesn’t require much in the way of water, but has trouble blooming in overly hot and humid conditions. Fertilization is only needed for nutrient-poor soil, and regular deadheading will ensure prolific blooms throughout the season. Choose Swan River daisies for container gardening, where they cascade over the sides, to cover large portions of a garden bed, or as borders. In the fall, dig up your daises and bring them inside for the winter, and then, relocate them back outside the next spring.

The Spruce / Evgeniya Vlasova

The Spruce / Evgeniya Vlasova


Like most daisies, Swan River daisy is best planted in a sunny location. This plant will bloom and thrive in a location with more than 6 hours of direct sunlight a day. Swan River daisy can survive in partly shady conditions, however, the blooms won’t be as plentiful or last as long. 


Swan River daisy requires rich, moist soil for vibrant growth and colorful flowers. That said, this plant can tolerate average, or even poor, soil conditions, but growth and bloom production may suffer. For best results, amend your soil so that the pH lands somewhere between 6.0 and 8.0. The most steadfast requirement for this daisy is well-drained soil, as an overly moist ground can cause root rot or flopping.


Once mature, Swan River daisy typically does well relying on rainfall. However, during drought periods, you’ll need to supplement by watering one or two times a week. If the soil is sandy and extremely well-drained, up this amount enough to eliminate wilt. Ensure that the soil dries completely in between waterings to avoid root rot and fungal infections.

Temperature and Humidity

An annual plant in USDA zones 2 to 8, Swan River daisy performs well in a wide range of temperatures. It is hardy enough to withstand bouts of heat and drought, but may show signs of protest, by wilting or drooping, in extremely hot and humid conditions. The preferred temperature range for this flower is 50 F to 78 F.

In USDA hardiness zones 9 to 11, Swan River daisy is considered a perennial, assuming winter temperatures are mild enough for this plant to retain its viability. Blooms will taper off at the first frost, but the finely textured gray-green foliage will continue to give you aesthetic pleasure all winter long. 


Determining whether or not you need to fertilize your Swan River daisy begins with understanding your current soil situation. Overfertilization may burn the roots, and too much nitrogen in the fertilizer can contribute to leggy growth. Amend poor soil conditions before planting with organic material, like mulch, compost, and peat. Then, a weekly dose of slow-release organic fertilizer is recommended, steering clear of high nitrogen products, and instead opting for one that encourages bloom. Follow the amount recommended on the package and decrease it slightly to avoid overfertilization.

Types of Swan River Daisies

Several varieties of the Swan River daisy feature different colors and growth patterns. Choosing the correct one for you depends on your gardening goals and space. Here are a few gardener’s favorites:

  • The Brachycome ‘Blue Zephyr’ variety features purple petals that have a significantly blue color tone. This type matures to about 12 inches in height, making it a good choice for planter boxes or garden borders where it won’t overpower its surroundings. 
  • Brachycome iberidifolia ‘Summer Skies’ bears flowers of lavender and white and grows to a height of 12 inches. This variety flowers the same year it is sown and makes a great addition to a pollinator garden.


Swan River daisy usually requires a midsummer pruning to encourage bushy new growth and to revive the plant, priming it for a fall bloom. During the heat of the summer and after the first bloom, trim the plant back to half its height. Deadheading is also helpful during the flowering period. Pinching off spent flowers, or cutting flowers in their prime for enjoyment inside, will stimulate the production of more blooms.

Propagating Swan River Daisies

Propagating Swan River daisy by cuttings is a relatively easy and economical way to multiply your plant for enjoyment in a container or in another part of the garden. Cuttings should be taken just before the flowering period with the hopes of getting a fall bloom, once the new plants mature.

Here’s how to propagate Swan River daisy from cuttings:

  1. Gather garden shears, a sharp razor blade, and alcohol wipes.
  2. Clean your shears and blade with the wipes and allow them to dry.
  3. Trim a shoot from the plant that includes at least one node and two healthy leaves. (Do so before the active flowering stage, as the plant will have more stored energy in its root system and will better recover from having a shoot removed.)
  4. Use the blade to make a single cut through the center of the node.
  5. Place the shoot in water or a moist, soil-less potting mix, making sure to keep it moist until germination.
  6. Swan River daisy cuttings will root in about 15 days. When they grow two sets of leaves, they are ready for transplanting into the ground.

How to Grow Swan River Daisy From Seed

To propagate Swan River daisy from seed, you’ll need to collect the seeds from the flower’s center. To do so, snip the bloom from its stalk once it has started to fade. Place the flower inside a paper bag or on a paper towel and wait for it to dry completely before harvesting the fine, small seeds from its disc. Save the seeds in a cool, dark, watertight location. Then, start the seeds 4 to 6 weeks before the average last frost date in your area by planting them indoors on a seed tray filled with a layer of seed-starting mix. Keep the medium moist until the seeds germinate in 10 to 18 days. You can make the most of the plant’s bloom cycle by sowing your seeds in phases spaced two to four weeks apart.

Potting and Repotting

With bushy foliage and plenty of blooms, use Swan River daisy to spruce up your patio, deck, or porch by planting it in a container. Use a terracotta or clay pot with adequate drain holes and fill it with an all-purpose potting soil containing vermiculite. Plant daisy starts so that the roots are fully covered by the soil. Water the pot, and allow it to drain thoroughly before relocating it to its permanent sunny location. Container daisies will benefit from an organic, slow-release, phosphorus-rich fertilizer given a few times during the growing season. Deadhead flowers in pots, just as you would in the garden, to encourage more blooms.


Since most Swan River daisies are grown as annuals, you will need to dig them up and bring them inside should you want to overwinter the plant. To do so, trim off the dead growth, dig up the root ball, and then relocate it to a pot with ample drainage and porous soil. Bring the pot inside and place it in a sunny window. Continue growing your daisy indoors, but don’t expect it to bloom in the winter. Come spring, relocate it back outside after all threat of frost has passed.

Daisies grown in zones 9 through 11 can be cut back to the ground to overwinter in your garden bed.

Common Pests & Plant Diseases

The Swan River daisy rarely falls victim to pests, especially when cared for as an annual. That said, slugs and snails have been known to munch on the plant’s leaves at night. To deter them, place coffee grounds, eggshells, or slug deterrent at the base of the plant to ward off offenders.

Powdery mildew and foliar fungal disease can move into an unkempt crop of Swan River daisies. To prevent this, make sure to allow ample space between the plants and don’t overwater them. If a fungus moves in, trim the infected plants to open up the airflow and dry out the soil. This should remedy the situation unless it’s advanced. Chemical fungal treatments are rarely helpful.

How to Get Swan River Daisy to Bloom

Like all daisies, Swan River daisy needs ample sunlight for prolific blooms. Daisies grown in shade conditions may need to be relocated if flowers seems delayed. With this cultivar, sowing seeds at a staggered rate of every two weeks will give you continuous blooms in your garden throughout the season. Also, deadheading spent flowers during the blooming period will stimulate the plant to bloom more.

Common Problems With Swan River Daisy

Swan River daisy has issues growing in hot and humid conditions. If temperatures and humidity become extreme, this plant may wilt, slow its bloom, or stop blooming altogether in an effort to conserve its energy. In addition to slow growth and bloom, humid conditions can also bring on root rot if the soil stays consistently wet.


  • Swan River daisy is native to Eastern Australia and grows wild in sandy or clay soil, on sandy hills, in the plains, along rivers and streams, and among granite outcroppings.

  • Swan River daisy is most commonly seen in blue and purple, but cultivars are also available in pink and white, with either yellow or black centers.

  • The flower’s common name is derived from its native habitat along the banks of the Swan River in Australia. This is where the plant was first discovered. Its scientific name, Brachycome, comes from the Greek word brachys, meaning “short,” and kome, meaning “hair.”

Disclaimer: Curated and re-published here. We do not claim anything as we translated and re-published using google translator. All images and Tattoo Design ideas shared only for information purpose.

Related Posts