Northern Catalpa: Native Plant Guide

Common NameNorthern catalpa, catalpa, hardy catalpa, cigar tree
Botanical NameCatalpa speciosa
FamilyBignoniaceae
Plant TypeDeciduous tree
Mature Size40-70 ft. high, 20-50 ft. wide
Sun ExposureFull, partial
Soil TypeMoist, well-drained
Soil pHAcidic to neutral (5.5-7.0)
Bloom TimeLate spring/Early summer
Flower ColorWhite
Hardiness Zones4-8 (USDA
Native AreaNorth America (U.S. Midwest)

The Spruce / Evgeniya Vlasova

The Spruce / Evgeniya Vlasova

The Spruce / Evgeniya Vlasova

Northern Catalpa Care

Northern catalpa is an easy tree to grow in medium to moist loamy soil that is well-drained and in a full sun to partial shade location. This large tree is best suited for large open spaces at least 50 feet from permanent structures or underground features, such as pools or sewer lines. These are trees that will require some cleanup after the flower petals, seed pods, and leaves drop.

You’ll want to be sure you’re not planting a northern catalpa where its flowers and seeds can drop on sidewalks, as they can be slippery. It is also a relatively brittle tree, especially as it gets older, which means you may face frequent cleanup after storms.

Warning

Because it self-seeds so readily, northern catalpa is considered a colonizer species. Its prolific reproduction is only a problem, however, if it damages the native ecosystem, crowds out other species, or provides no utility to wildlife. Catalpa trees are native to the United States, which means they do not meet the USDA’s definition of invasive species.

Light

This tree will grow best in both full sun and partial shade. It prefers a minimum of six hours of direct, unfiltered sunlight every day.

Soil

Northern catalpa grows best in a relatively moist, loamy soil with a slightly acidic pH, but it will tolerate nearly any soil that is well drained, even if the clay content is fairly high.

Water

These trees prefer to be fairly moist and can tolerate a wide range of moisture conditions, including some flooding. When the tree is young, water whenever the soil surface is dry. A mature tree requires less watering, such as a good rainfall or irrigation every week or so. Well-established trees can nicely handle short periods of drought.

Temperature and Humidity

Hardy in zones 4 to 8, an established northern catalpa tree tolerates both winter cold and fairly hot and dry summer conditions, provided the soil moisture is adequate.

Fertilizer

If the soil in your area happens to be rich and loamy, you may not need to fertilize your northern catalpa tree at all. However, when planting in clay or sandy soil, you should consider applying a standard 10-10-10 fertilizer a few weeks after planting. Fertilize again each spring while the tree is young.

Types of Catalpa

There are no common named cultivars of northern catalpa, but there is a closely related species, southern catalpa (Catalpa bignonioides), that occupies a similar role as a landscape tree in warmer growing regions.

C. bignonioides is a smaller tree with purplish flowers and thicker leaves, and many people feel it is a better landscape specimen than the northern catalpa, which can be somewhat ungainly. Southern catalpa is hardy in zones 5 to 9. In zones where these two species overlap, landscape professionals often lean toward the southern catalpa as the preferable tree.

Pruning

Regular pruning is a required duty for these trees—both to remove dead or dying branches and eliminate hazards, as well as to manage its size and shape within your landscape. Thinning out the crown also promotes the wind moving freely through the crown, which is important to prevent damage due to high winds.

Pruning a large tree is usually a job for a professional trimmer. Pruning for shape and size is best done during the winter or early spring dormant period.

Propagating Northern Catalpa

Seed-starting is quite easy for this tree, but northern catalpa can be also propagated by rooting stem cuttings taken in summer after the spring growth is established. Here’s how:

  1. Select a disease-free stem tip with flexible new growth and hard older wood beginning a few inches down. Cut it off a 4- to 8-inch section, using sharp pruners. Strip off the bottom leaves, but leave at least two leaves at the top of the cutting.
  2. Fill a small pot with a mixture made of equal parts peat moss, perlite, and coarse sand.
  3. Use a sharp knife to make two vertical slits in the cutting, from the bottom to a point about one inch up.
  4. Dip the cut end of the cutting in rooting hormone, then plant it in the prepared pot. Lightly water the soil, then place the pot in a plastic bag and position it in a shaded location where the temperature is 60 to 70 degrees Fahrenheit.
  5. Check the cutting every few days to make sure it remains moist, and periodically tug on the cutting to see if roots are developing. When roots are evident, remove the plastic bag.
  6. Move the rooted cutting to a more sunny location and continue growing it, watering when the soil becomes dry, until it is roughly double in size. At this point, it can be planted in the landscape.

Growing Northern Catalpa From Seed

The seeds found inside the long, tubular pods are remarkably easy to plant and nurture into new trees. It’s not uncommon for the seeds to simply fall into surrounding soil and sprout up as volunteers. These volunteers can readily be dug up and transplanted into a new space.

It’s also an easy matter to collect some of the seeds by peeling a ripened pod apart. The bean-like seeds can be stored up to two years in the refrigerator before you plant them in spring in a desired location. Or, you can start new plants indoors by planting seeds in pots filled with potting mix in late winter. The seeds should be just barely covered with soil or potting mix. Keep the seeds and growing medium lightly moist in a location with bright but non-direct light until they germinate. After sprouting, move the seedlings to a sunny location and keep them well watered as they are growing.

Seeds started in pots in spring may be ready to plant in the landscape by fall. Or, they can be kept in the pot to overwinter and grow for another season until you’re ready to plant.

Common Pests and Plant Diseases

The only serious pest problem for northern catalpa is the caterpillar of the catalpa sphinx moth, which may badly damage the foliage when it feeds on leaves. The worm rarely does lasting damage to the tree, which usually recovers the following year.

Northern catalpa trees usually do not have serious problems with diseases or insects, though they sometimes have issues with verticillium wilt, leaf spot, mildew, and twig blight.

How to Get Northern Catalpa to Bloom

Don’t worry if a young tree doesn’t flower immediately, as it’s not uncommon for it to take seven years or more before the tree is mature enough to flower and set seed. A mature tree that doesn’t flower may be reacting to conditions that are too shady, or to soil that is lacking in nutrients. Establishing a regular feeding routine may help the tree flower more robustly.

A catalpa that suddenly stops blooming after years of normal flowering may be reacting to an unseasonable late frost that has killed the flower buds. This is not a cause for worry, as the tree will usually return to a normal blooming pattern the following spring.

Common Problems With Northern Catalpa

Most of the complaints about northern catalpa trees involve its growth habit and messy behavior.

Invasive Roots

Northern catalpa trees have wide-ranging, invasive roots that can infiltrate foundations, sewer lines, buckle retaining walls, or compromise underground swimming pools. For this reason, they should be planted far away from any structures the roots might affect. Large trees may need to be removed if they begin to cause problems.

Messy Growth Habit

Another behavior that you should know about before choosing this tree is the sheer messiness of the species. The spring flowers, beautiful while on the tree, can be a soggy, slippery, smelly mess when they fall onto a sidewalk, deck, patio, or driveway.

The dried seed pods leave similar mess when they fall, and their sharp points can even cause pin-prick wounds as they plummet from the tree. The huge leaves, though providing excellent shade, require a lot of raking once they drop in fall. And even mild winds can leave your yard covered with sticks and twigs that fall from this brittle tree.

In other words, know what you’re getting into before planting a northern catalpa.

Tree Has Become Too Large for its Space

It’s quite common for homeowners to underestimate the speed with which a catalpa tree can get quite large. And because this is a brittle tree prone to wind damage, it’s not a specimen you want hanging over your home or carport. A tree that is becoming too large can be reduced by a professional tree trimmer, but it’s likely you will need to remove the tree at some point if it is growing in a poor location.

Leaf Drop

A catalpa tree that suddenly drops much of its foliage can be telling you one of several things, some of them quite serious. In some cases, unusually hot, dry weather may cause a temporary leaf drop that, while disfiguring, does not kill the tree. It usually recovers the following year.

But leaf drop accompanies by shriveled, dead branches may be in the early stages of the most serious fungal disease to affect catalpas, verticillium wilt. Like other less serious diseases, verticillium first announces its presence by curling, yellowing leaves, but rather than recovering, the tree’s damage gradually expands from the crown down.

Another cause of leaf destruction is the feeding of catalpa worm—the larval stage of the catalpa sphinx moth. Complete defoliation is possible, but affected trees usually recover entirely the following year.

FAQ

  • First cultivated in 1754, the wood of the northern catalpa was originally used for fence posts and railroad ties due to the tree’s fast growth rate and resistance to rot. It’s fast growth rate and dense shade quickly made it appealing as a landscape tree.

  • It’s not uncommon to spot certain wildlife visiting the flowers of the northern catalpa, including hummingbirds and bees. It’s also the sole host of the catalpa sphinx moth.

  • The ornamental value of this tree is limited to late spring when beautiful orchid-like flowers cover the tree; and summer, when its large, beautiful leaves provide exceptionally dense shade and form in the landscape. The fall color for northern catalpa is a fairly ordinary yellow, and it is not particularly appealing in winter.

  • Although there are documented cases of northern catalpas living past the century mark, about 60 years is a more normal lifespan for this fast-growing tree. Old trees can become rather brittle and susceptible to wind damage, so they sometimes are lost to storms once they pass 50 years of age.

Disclaimer: Curated and re-published here. We do not claim anything as we translated and re-published using google translator. All images and Tattoo Design ideas shared only for information purpose.

Related Posts