Painting Cedar Siding Guide
Painting Cedar Siding Guide: Cedar siding is well known for its alluring look. It also shares a good name for withstanding weather conditions and dissent fading and splintering. The idea to prime and paint will not only add seven stars to the beauty of your dream home but will also safeguard cedar siding from rot and mold. You can also clean off any dust; filth and grease with much ease if sidings are well painted.
Though the cedar siding is a beauty bestowed with natural finishing, many cedar owners might feel the necessity to paint its sidings in order to save it from turning into weathered. In accordance to Paul Mackie at the Western Red Cedar Lumber Association (WRCLA), it is clear that red cedar siding that has been firstly coated with a stain-blocking primer and then painted with a cent percent acrylic-latex paint possess the maximum anticipated service life in comparison to any other coating process. You can find factory finishing of such type in those market places wherever cedar siding is traded. But the installed cedar siding that is painted on all its sides is just the best from its safety point of view.
Let us learn the correct ways of painting cedar siding with this helpful guide.
Choose the Correct Type of Paint for the Cedar
The first way to paint cedar siding rightly is to choose the correct type of paint for the cedar. For the exterior purpose, Acrylic-latex paint stands top in the list when it comes to rating the best bodyguard paint to protect cedarwood. Your finishing style completely depends on the choice of your style.
Painting the sides of cedar is a matter of style for a lot of owners rather than a matter of safety. Painted siding is the most favored look of cedarwood in many markets of the world. Apart from cladding, there are a lot many rewards that Western red cedar possesses. All credit goes to the natural factors that make it highly sustainable and renewable in use.
For an excellent effect, use a stain-blocking primer on all the new six sides along with the coating of cent percent acrylic-latex paint. It is highly commended to use alkyd-oil primers but if your cedar has stains then you may also prefer a superior quality latex primer.
Prime the Cedar Before You Paint It
In order to protect the sides of the cedar, prime the cedar before you paint it. It is highly advisable to prefer the two-coat procedure. This two-coat system imbibes the first coat of primer and second of paint. So, coat your cedar with a good primer and let it dry for some time. Then apply paint over it for best results.
By painting the weathered cedar wood without a primer will always give rise to adhesive problems. This process will lend a long service life to a cedar in comparison to a single coat of paint or even the use of solid stain.
Brush the Paint Rather Than Spray or Roll
Cedar has a porous wood surface and so requires paint in large quantities. It is always recommended to hand- brush the paint over cedar rather than using any spray or roller. Hand-Brushing will not only lend it a perfect look but also give it an even ending. So, even if you are using a spray to paint the cedar; make sure to hand brush it too. This will give you the desired result with smooth finishing and enhance the look of cedar.
Choose the Optimal Window of Time for Painting Cedar
A period of two weeks to twelve weeks is considered as an optimal window for painting cedar. This means that once the cedar is installed it is strongly advisable to paint it within two weeks. But in case if at times it is not possible then the maximum that you can wait is for 12 weeks. There are major reasons behind this.
If you do not paint the fresh sides of cedar within two weeks of installation, the coating adhesion will not be much. The problems will arise and increase with the passage of time. As per the results of tests conducted by Forest Products Testing Lab (managed by the USDA for the Forest Service), cedar siding loses its half ability to strongly hold coating of primer and paint if left unpainted for a longer time. This is also due to its vulnerability to sun, rain, and wind.
On the contrary, another test conducted by an experimental facility in Madison, Wisconsin over a red cedar with sidings being coated first with the primer and then paint on top of it, proves that cedar reflects no degradation of coating process even after 25 years of that test.
Many other tests were conducted in regard to the coating system leaving a quarter difference in time periods like three months, six months, nine months and twelve months prior using primer and paint. The conclusion of those tests revealed this fact that; the more time you allow the cedar siding to weather, the quicker the coating system will get flunked.
Be Careful When Painting Very Old Cedar Siding
You need to be well prepared and careful when painting a very old cedar siding. Despite good preparation, it is still unsure if the paint would last long or not. So, what to do? Surface preparation is the best gateway to achieve success when handling a weathered cedarwood. You need to get rid of any loosened finishing or degraded surface fibers prior to recoating. Also, make sure that the sides are completely free from dust, dirt, and mildew.
For a smooth textured siding, sanding is an awesome alternative and there are commercialized restorers or strippers available to execute this chore in the best possible way.
Choose Vertical Grain Cedar If Possible
When it comes to making a choice, always choose vertical grain cedar if possible. Due to its cellular structure, this type of cedar remarkably engrosses alkyd-oil stain restricting primers in comparison to that of flat grain cedar. Nevertheless, the knotty cedar is pretty friendly with these primers and holds them firmly because their siding design holds a textured expression.
Use a Two-Coat System Rather Than Self-Priming Paint
There is no tested data on self-priming paint by WRCLA. The warranties given by the manufacturers of primer and paint in regard to the finishing of cedar sidings includes a single coat of primer and single or double coats of paint on top of it. The use of a two coat system should be preferred rather than self-printing paint for that captivating look of cedar with complete protection.
I hope the above cedar painting guide proves a great help to you. Do share if you have any other ideas over it.