Select the Right Setting for Ironing Any Fabric

Selecting the correct temperature on an iron can make the difference between a good job and a disaster. The right temperature makes ironing quicker and gives a more professional result. The wrong temperature can make it harder to remove wrinkles or curled hem edges, or even worse it can burn a hole in the fabric.

While all irons differ slightly in heat output, use the following basic guidelines for the proper temperatures to iron different types of fabric. The settings use a scale of 1 to 7, 1 being cool and 7 being very hot. 

Ironing Temperature Settings for Fabrics

FabricIron SettingIroning Tips
Acetate1Press on the wrong side of the fabric while it is still damp.
Acrylic3 
Beaded1Place the fabric on a plush white towel, and press on the wrong side using a pressing cloth to prevent damaging the beads.
Cashmere3Do not press; instead, use steam only. The iron should not even make contact with the cashmere since agitation while damp from the steam ruins the fibers. For hard, set-in wrinkles, press on the wrong side using a pressing cloth.
Corduroy7Place the fabric on a plush white towel, and press on the wrong side of the fabric. Turn the fabric over, and use steam-only on the front side of the fabric to refresh any crushed pile.
Cotton, lightweight5Press dark colors on the wrong side of the fabric to prevent shine marks.
Cotton, heavyweight7Press the fabric while still slightly damp. For dark colors, press only the wrong side to prevent shine marks.
Damask5Use a pressing cloth between the fabric and the iron to prevent snagging long fibers.
Lace3Use a pressing cloth between the fabric and the iron to prevent snags and pulls.
Linen5Iron on the wrong side of the dampened fabric for the best linen finish.
Nylon1Always use a pressing cloth for extra protection between the fabric and the iron because nylon burns easily.
Olefin3 
Polyester3 
Ramie3Iron on the wrong side of the fabric while it is still damp.
Rayon3Iron on the wrong side of the fabric to prevent leaving a shine on rayon fabric.
Satin3Press on the wrong side of the fabric with a pressing cloth between the iron and the fabric. Use no steam, which can leave watermarks on the fabric.
Sequined fabric2Do not iron because sequins can melt. Use light steam on the wrong side of the fabric to remove wrinkles.
Silk3Press on the wrong side of the fabric. Do not use steam which can leave watermarks on some silk fabrics.
Synthetic Blends3 
Velvet3It is preferable never to iron, only steam, velvet to remove wrinkles. If the wrinkles are severe, place on a plush white towel, and press on the wrong side of the fabric with a very light touch. After ironing, use steam only on the front side of the fabric to refresh crushed pile.
Woven Wool3Use a damp pressing cloth between the iron and fabric. Iron on the wrong side of the fabric to prevent snags and shiny marks.

Iron Setting Temperatures in Celsius and Fahrenheit 

If your iron uses a different scale or you want to know more exact temperatures for ironing different types of fabric, follow these guidelines for degrees Celsius and Fahrenheit:

  • Linen: 230 C/445 F
  • Triacetate: 200 C/390 F
  • Cotton: 204 C/400 F
  • Viscose/Rayon: 190 C/375 F
  • Wool: 148 C/300 F
  • Polyester: 148 C/300 F
  • Silk: 148 C/300 F
  • Acetate: 143 C/290 F
  • Acrylic: 135 C/275 F
  • Lycra/Spandex: 135 C/275 F
  • Nylon: 135 C/275 F

The Spruce / Taylor Nebrija  

How to Manage the Temperature of Your Iron

Unless you are just ironing a single garment, separate your wrinkled clothing and linens by type of fabric before you begin ironing. Start by ironing the items that require the lowest temperature, such as acetate and nylon. Then, move to silks, polyester, and other synthetic fabrics like olefin. Finally, iron cotton and linen fabrics.

If you must switch back to a lower iron temperature, give your iron at least five minutes to cool down before you use it again.

When in doubt about what temperature to use, start low and iron on the wrong side of the fabric with a pressing cloth. You can always move the temperature up gradually to remove tougher wrinkles and still prevent scorching. Scorch marks can be difficult to remove but not always impossible if caught early and treated while they are light in color.


The Spruce / Taylor Nebrija 

Disclaimer: Curated and re-published here. We do not claim anything as we translated and re-published using google translator. All images and Tattoo Design ideas shared only for information purpose.

Related Posts